Good Quality Laboratory Furniture - Epoxy resin top – Sateri
Good Quality Laboratory Furniture - Epoxy resin top – Sateri Detail:
There are various kinds of fworktops for your selection except the kinds as below:
| Attribute | Lab-grade phenolic resins worktop | Epoxy resin worktop | Ceramic worktop |
| Ingredient | Dipping phenolic resin into special multi-layer kraft paper, it’s hot-solid formed under high temperature and pressure. | Quartz sand and epoxy mixed with special bond. | Combined clay, kaolin and feldspar mixed with many special material. |
| Corrosive-resistance | It’s resistant for many kinds of acid, alkali, solvent and reagent etc. | It’s resistant for many kinds of acid, alkali, solvent and reagent etc. | Excellent |
| Heat- resistance | Normal:135℃it couldn’t touch flame directly. | 600℃ heat resistance | 1000℃ heat resistance |
| Colour | Black, gray, dark green | Gray, green | Black, gray, white, green |
| Worktop thickness | 12.7mm, 16mm, 19mm | 16mm, 19mm, 25mm | 20mm |
| Water-resistant | Water absorption:0.6% | Water absorption:0.008% | Excellent |
| Physics feature | Good | Good | Excellent |
| Forbidden Reagent | There are little defects after meeting with 65% nitric acid, chromic acid, hydrofluoric acid. There are defects after meeting with 98% sulfuric acid. | There are little defects after meeting with 98% sulfuric acid, cleaning solution of heavy chromic acid, 40% chromic acid, 50% sodium hydroxide. | _ |
| Test method | For many medicine with fixed hydrocarbon: dripping it on the worktop directly; for medicine with volatility:Infiltrating it into absorbent cotton still saturated state and touching with desktop, after that it should be covered by visual glass or jar; Above medicine should be placed on the desktop at 25℃ room temperature, after 16 to 25 hours the desktop should be washed with soap and water. At last it can be tested and evaluated when the desktop is dried. | ||
Product detail pictures:
Related Product Guide:
Ventilated Exterior Wall System Market 2019 – Nippon Sheet Glass (Japan), Saint-Gobain (France), Asahi Glass (AGC) (Japan), Alcoa Corporation (US), PPG Industries (US) | Document Cabinet
Under Trump, more leaks — and more leak investigations | Mending Wind Fume Hood
We're committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for Good Quality Laboratory Furniture - Epoxy resin top – Sateri, The product will supply to all over the world, such as: Uzbekistan , Myanmar , Argentina , In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
By Jonathan
from Albania
- 2015.11.02 11:11
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Julia
from Colombia
- 2016.10.13 10:47
