Manufacturer of Stainless Steel Product - Laboratory Worktop – Sateri
Manufacturer of Stainless Steel Product - Laboratory Worktop – Sateri Detail:
There are various kinds of fworktops for your selection except the kinds as below:
| Attribute | Lab-grade phenolic resins worktop | Epoxy resin worktop | Ceramic worktop |
| Ingredient | Dipping phenolic resin into special multi-layer kraft paper, it’s hot-solid formed under high temperature and pressure. | Quartz sand and epoxy mixed with special bond. | Combined clay, kaolin and feldspar mixed with many special material. |
| Corrosive-resistance | It’s resistant for many kinds of acid, alkali, solvent and reagent etc. | It’s resistant for many kinds of acid, alkali, solvent and reagent etc. | Excellent |
| Heat- resistance | Normal:135℃it couldn’t touch flame directly. | 600℃ heat resistance | 1000℃ heat resistance |
| Colour | Black, gray, dark green | Gray, green | Black, gray, white, green |
| Worktop thickness | 12.7mm, 16mm, 19mm | 16mm, 19mm, 25mm | 20mm |
| Water-resistant | Water absorption:0.6% | Water absorption:0.008% | Excellent |
| Physics feature | Good | Good | Excellent |
| Forbidden Reagent | There are little defects after meeting with 65% nitric acid, chromic acid, hydrofluoric acid. There are defects after meeting with 98% sulfuric acid. | There are little defects after meeting with 98% sulfuric acid, cleaning solution of heavy chromic acid, 40% chromic acid, 50% sodium hydroxide. | _ |
| Test method | For many medicine with fixed hydrocarbon: dripping it on the worktop directly; for medicine with volatility:Infiltrating it into absorbent cotton still saturated state and touching with desktop, after that it should be covered by visual glass or jar; Above medicine should be placed on the desktop at 25℃ room temperature, after 16 to 25 hours the desktop should be washed with soap and water. At last it can be tested and evaluated when the desktop is dried. | ||
Product detail pictures:
Related Product Guide:
Alpine HC adds new specialist rotating chair beds to existing range | Mending Wind Fume Hood
Brexit: Cabinet agrees ‘collective’ stance on future EU deal | Document Cabinet
We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Manufacturer of Stainless Steel Product - Laboratory Worktop – Sateri, The product will supply to all over the world, such as: Portland , Karachi , Guatemala , Our tenet is "integrity first, quality best". Now we have confidence in providing you with excellent service and ideal merchandise. We sincerely hope we can establish win-win business cooperation with you in the future!
By Lilith
from Birmingham
- 2016.12.09 14:01
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Tina
from Gabon
- 2016.11.29 11:09
